Two Billion Hours
Thursday, October 13, 2011Viewed 1884 times
Failure Data • (1) Comments • Permalink
When I studied Reliability Engineering in graduate school, I was taught that failure rate data came from field failure studies. I assumed that operating companies always kept accurate records when a piece of equipment failed. I also assumed that someone would investigate the failures and assign a root cause. Later, I found that is not quite reality in many industries. Even so, field failure data is a valuable source of information even when the reports are incomplete and information is missing.
This past summer, exida completed a large field failure study on pressure transmitters and remote seals. This study was based on manufacturer warranty return data. Experts know that type of data should not be used by itself to calculate failure rates, primarily because not all failures are reported to the manufacturer. However, the data is useful. It can be analyzed to reveal existing failure modes, establish ratios of failure modes, and provide bounds on failure rates.
At exida, we use a model- based failure rate / failure mode prediction technique. Models for particular products, even specific manufacturers and model numbers, are established using detailed production design information via an FMEDA. Given that model, the results from field failure studies can be compared in a feedback loop method to reveal any weakness in the model. Model parameters will be adjusted to improve accuracy.
The field failure studies we have done hit the two billion unit operational hour mark. This quantity of data has been used to tune our component failure database. When that database is used in the FMEDA model technique, the failure rate / failure mode predictions seem to match the field data quite reasonably. One, of course, can never stop gathering field failure data and checking the models in the quest for better accuracy.
Tagged as: FMEDA , Failure Rates , Failure Rate Data
I wonder the name of Iran in location box would stop you from reading my comments or precisely my question:
It is true hear in Iranian industry as well that failure rate data are not record in the field. Therefore for me as a Safety Engineer it is very difficult to complete FMEA technique. I look at operational records and compare it with maintenance records and with technical parts store records and find no any agreement between them. So I can not propose accurate list of parts to be bought for next year normal operation.
On the other hand due to many reasons including difficulties on transferring currency to out of country I am unable to purchase EXIDA software. What would you do in this situation. How can motivate field people to have reliable records. Thank you.
Page 1 of 1 pages