Improve Safety and Reduce False Trips - Configuring the Safety Transmitter Interface
Recording Date: June 2017
Safety certified transmitters often signal a failure detected by their excellent diagnostics via sending the current output levels to “Out Of Range.” If the safety PLC is correctly configured to interpret these currents, safety can be improved and the false trip rate can be reduced. This webinar will explain how to configure the Safety Transmitter Interface.
About the Presenter:
Loren Stewart, CFSE
Loren Stewart graduated from Virginia Tech with a BSME. She has over 10 years of professional experience. She currently works for exida consulting as a safety engineer, focusing on the mechanical aspects of their customers. Along with assessing the safety of products and creating FMEDAs and reports, she researches stiction and is creating a database for the 2H initiative according to IEC 61508.