Safety / Cybersecurity Lifecycle Overview: Part 2 (Design Phase) | exida

exida Recorded Webinars

Safety / Cybersecurity Lifecycle Overview: Part 2 (Design Phase)

Recording Date: September 2016

This webinar is the second of a 4 part series to look at the cybersecurity lifecycle. Part 2 introduces the design and implementation phase and focuses on the steps involved. Key topics of this second part includes:

     
  • Conceptual Design
  •  
  • Security Level Verification
  •  
  • Detailed design & procedures development
  •  
  • Design validation / system integration
  •  
  • Cyber FAT / Installation / Commissioning / Cyber SAT
  •  
  • Initial validation of countermeasures
  •  
  • Cybersecurity assessments

View Webinar   


About the Presenter:

Hal Thomas, CFSE

Hal Thomas Hal Thomas is widely recognized as an expert in functional process safety analysis, including safety instrumented systems and high availability automation systems. He helped pioneer the use of HAZOP, fault tree analysis, consequence analysis, LOPA, and introduction of the SIS work process while at Air Products. He was formerly an Engineering Associate – Process Safety and Technology Manager for Safety Instrumented Systems at Air Products and Chemicals, Inc. His principle work responsibilities included assisting and mentoring process safety and process control engineers in hazard identification, the use of fault tree analysis, LOPA, SIL assessment, SIL verification, leading new technology hazard reviews, as well as to write standards and procedures to promote high quality and consistent results. He is a member of the CFSE Governing Board and is a senior member of ISA. He has authored numerous published papers.